Samsung Galaxy S4 GT-I9500 Null Imai repair done with Odin tools free download HERE

Samsung Galaxy S4 GT-I9500 Null Imai repair done with Odin tools free download HERE

Samsung Galaxy S4 GT-I9500 Model Image :

Must Read:

Samsung Galaxy S4 GT-I9500 in some time imei will be null but don't worry i have imei null solution but remember after this tutorial has been finished and your problem not solve so understand in that hardware issue when you starting following to this tutorial first your Samsung Galaxy S4 GT-I9500 battery must charged and some technician flashing in Samsung Galaxy S4 GT-I9500 remember that Firmware to be tested without tested your try to flashing with another firmware so your Samsung Galaxy S4 GT-I9500 imei will be damage then you check on device to dial *#06# then you can see imei null so remember before flashing your Samsung Galaxy S4 GT-I9500 firmware will be tested so le't go how to null imei repair in Samsung Galaxy S4 GT-I9500.

Download Odin tool from HERE

GT-9500_NOV.pit (3 KB) Download here

BOOTLOADER_I9500XXUBMF8.rar (478 KB) Download here

PDA_I9500XXUBMF8.rar (1.29 GB) Download here

PHONE_I9500XXUBMF8.rar (4.8 MB) Download here

CSC English
CSC_I9500SERBMF8.rar (144.3 MB) Download here

CSC Arabic
CSC_OJV_I9500OJVBMGA_1123221_REV00_user_low_ship.r ar (128.2 MB) Download here

Required for Null Imei Repair:

1. Odin Tool

2. Samsung Galaxy S4 GT-I9500 Imei null repair firmware

3. Samsung Galaxy S4 GT-I9500 device with full battery charged

4. USB cable

5. Computer or Laptop

Procedure:

1. Download both of files 1. Odin Tool 2. Fix Imei Null Firmware

2. Extract both of files

3. Open Odin Tool folder and open Odin Tool

4. Click on PDA button and choose Firmware file

5. Put Download Mode your device  ( Press and Hold Volume Down + Home + Power Button)

6. Insert USB cable in to Device

7. Click on Start Button

8  You are done

Screen shot of Imei null :

Samsung N7100 note2 imei null & basband repair solution is here tested.

Samsung N7100 note2 imei null & basband repair solution is here tested.

Imp: if your mobile stuck in bootlook and it does not boot some times.     it also may cause the efs problems.your mobile should compulsory boot if you repair your efs problems.and then

     your imei link will become 004999010640000 like this. and if your imei become like this you can repair your imei
     by the software boxes such as Z3X,OCTOPUS SPT ETC.
     if you want to repair your efs by octopus box, you first put your mobile into download mode and then press repair
     efs. after doing this, you should get imei like this(i.e. 004999010640000). and it is better to repair imei by
     usingz3x,octopus,spt etc.

The below is the process of how to repair efs with outbox imei using z3x.

1)first of all, download this the file N7100_repair_efs.rar if your mobile is null
2)than put your mobile into download mode and run odin select the n7100 repair efs file into PDA nd then flash it.
 yur mob still has imei null factory reset it and check or update it with official firmware 4.1.1 or 4.1.2..
if your imei is still null you have to use software box to repair efs to to get tis factory imei 004999010640000
i used octoplus to repair efs.i repaired with z3x box after getting this imei.

3)i jus t got error in the latest version, so i run samsung tool 16.1.
first jus t select the model n7100 and then press read info but you should enable use debbugging before you do this.
still if your mobile is not found, press read info again it will deduct and read the mobile.

Note: now the samsung tool 18 is also available so you can repair directly with out your cable.

4)after your mobile is read, then press repair and just write your imei.the imei of your mobile must be back side
in the battey. you must remove the mobile cover and just note your imei from the battery.


5) then check your imei repair option and then write down your imei and press ok.while doing its process it vil ask
 to cnnt uart cable. for this you must disconnt the usb and then connect usb after you will successfully get your imei.

6) If yu get Bypass MSL... error do it agin . use 510 k uart cabe .

Tested by Me 100%

Samsung Multi File Firmware Visit HERE

Samsung i9300 & N7100 Dead boot repair solution & imei null solution only for i9300

Samsung i9300 & N7100 Dead boot repair solution & imei null solution only for i9300

:: Procedure ::

* Download samsung s3 boot card maker Here

* Extract it on desktop

* Take a card reader insert memory card into the card reader and connect it to the pc

* From the extracted folder run Diskdump2.exe

* Select generic storage Device. pictures below follow it


* Now to write the scripts follow the below given picture

Now done your are succesfully created Dead boot memorycard

To continue further

:: Requerments ::

* Z3X samsung Box or SPT Box (i used z3x)

* special UART Cable (300k or 500k uartcable)

* Download teraterm-4.78 From Here

* Fully charged battery

Dead boot Reapairing procedure

* Download and extract teraterm-4.78 on desktop

* From extracted folder run ttermpro.exe there select serial port and change the serial port to z3x serial
port link below givin in the picture

* After Select The Serial Port Press Ok Button then Go To Setup Click Serial Port Option
Select Baud Rate 115200 Then Press Ok Button link below given in the picture

* Now insert the created boot card to the mobile

* Connect the Uart cable via z3x box

* Now Insert the battery and wait for 5min if the procces did not start disconnet the mobile close termpro agin try it.

* if it run success you will the result below given link this.

pit_check_integrity: invalid pit.(0x0)
pit_check_integrity: invalid pit.(0x0)
update_guid_partition_table: There is no pit binary.
fsd_reclaim 1283: MST is not recognized(mst.magic=0x0)
fsd_reclaim 1284: MST is not recognized
fsd_reclaim 1599: Error(nErr=0x0)
fsd_reclaim 1604: j4fs_rw_start is set to default value(128KB)
j4fs_open 153: Error(nErr=0x40000000)
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: 'param.j4fs' does not exist, make new one..
j4fs_write_file_bootloader 184: j4fs panic
fail
j4fs_read_file_bootloader 355: j4fs panic
load_j4fs_param: debug level file does not exist..*INCORRECT!*
init_fuel_gauge: battery is not detected, do not init fuelgauge
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL1:0x1b
init_microusb_ic: MUIC: CONTROL2:0x3b
init_microusb_ic: MUIC: CONTROL2:0x3a
PMIC_ID = 0x2
PMIC_IRQSRC = 0x0
PMIC_STATUS1 = 0x10
PMIC_STATUS2 = 0x0
PMIC_PWRON = 0x2
PMIC_IRQ1 = 0x27
PMIC_IRQ2 = 0x0
s5p_check_keypad: keypad value=0x0
s5p_check_reboot_mode: INFORM3 = 0 ... skip
s5p_check_upload: MAGIC CODE=d1b0f038
microusb_get_attached_device: STATUS1:0x3c, 2:0x0
s5p_check_download: update mode=0
j4fs_read_file_bootloader 355: j4fs panic
s5p_check_tzsw: invalid tzsw type! dummy?
scr_draw_image: draw 'download_error.jpg'...
j4fs_read_file_bootloader 355: j4fs panic
read_param_file: 'download_error.jpg' j4fs read failed!
fimd_div:13, div:1, FB_SOURCE_CLOCK:800000000, FB_PIXEL_CLOCK:57153600
a2, 60, 90,

* if you get this error at the end [Patch Stop] This is not Rom Code. you can't fix your mobile you have to change your emmc chip

TN default
<OK>
<OK>
[DVFS] INT(1) : 0
DRAM Type : LPDDR2 8G
[DVFS] MIF(3) : 0
[EPLL][VPLL][CLK_DIV] OK
<OK>
[LOCK SW/HW]ARM:0/0 INT:0/0 G3D:0/0 MIF:0/0 SHIFT:0/0
[DVFS] ARM(0) : 5
[DVFS] INT(1) : 0
[DVFS] G3D(2) : 0
[DVFS] MIF(3) : 0
[SD_INIT
SDMMC_HighSpeedONE]
SD_READ: 20000 20000 0x40008000 -> 668484 usec
<OK>
Inp32(uAddr) : 0xea00007e
FW Booting
[Patch Stop] This is not Rom Code.

* After done this your mobile must me and download mode or white screen if white screen manually put into download mode.

* After dead boot repair mine white screen i manually put into download mode picture below

 * Now update your mobile with factory firmware with PIT file lik below given and the picture.Factory firmware Download Here

 * After update complete your mobile may not have imei .imei null or your mobile will not boot beacause of dead boot repair. your efs must be corrupted

* To Fix this problem first root your mobile Download from here (flash it through odin select as odin)

* Now Download this EfS repair file and flash it through odin select as odin your mobile must boot
but the imei become link this 004999010640000
I9300_Repair_efs.tar.rar

 * if your imei is null you can't repair using this box so 1st you have to repair the efs using above given file. if your imei become link this only (004999010640000) you can repair using z3x or other samsung tool

* Now follw the picture to repair imei problem.

* After IMEI Repair