Samsung E2202 sim restricted, Flash, Imei Repair done 100% tested by me

Samsung E2202 sim restricted, Flash, Imei Repair done 100% tested by me

This tutorial tested by me. First i flash in z3x with many flash files done but after start phone then show sim restricted, but i try in miracle box and flash it so flash success done phone working very well but i can't repair imei in miracle box or volcano box because this is read flash file after i try z3x for imei repair so its done old version, i mean i try last two days after i done this job so here i put every link is tested or also screenshot its done by me so remember first before flash first check your device battery its must charged up to 70% so now let's go how to flash Samsung E2202 in volcano box or how to imei repair Samsung E2202 in z3x box.

Samsung E2202 flash file tested download here

Required for this tutorial:

1. Samsung E2202 device with well battery charged

2. Miracle box or Volcano box

3. Z3x box

4. Micro usb cable

5. Computer or Laptop

Procedure for Flash:

1. Download flash file from above link

2. Open Miracle box

3. Choose spd tab

4. Click on Write button

5. Choose flash file to downloaded from above link

6. Change Comport Baudrate  921600 to 460800

7. Click on USB cable button

8. Now Click on Start button

9. Press and hold Music key (center) and insert usb cable

10. You are done from flashing

Procedure for Imei repair:

1. Open Z3x box and open Samsung Tool

2. Choose model E2202

3. Go to Repair Option and Tick on At Mode

4. Click on Repair and fill legally imei and click ok button

5. Press and hold Music key (center) and insert usb cable

6. You are done

Samsung E2202 repair imei in z3x box screenshot:

Samsung E2252 Blinking, Restarting, Hang on Logo solution 100% tested by me without any box

Samsung E2252 Blinking, Restarting, Hang on Logo solution 100% tested by me without any box

This tutorial tested by me without any risk no need to any box it's very simple to flash just remember and following the tutorial step by step, you can use tutorial when your device blinking on logo, restarting problem, hang on logo, code issue etc problem then you can use this tutorial but remember to if you following this tutorial so you can't save data like contacts, photos, etc because this is factory full reset when your use this tutorial so remember to everyone who use this this tutorial now let's go how to flash samsung E2252 in flash tools.

Samsung E2252 Flash file or Tool download here

Required for Flash:

1. Samsung E2252 device with battery charged

2. Samsung E2252 flash file or tool with tested

3. Micro USB cable

4. Computer or Laptop

Procedure:

1. Download Samsung E2252 file or tool from above link

2. Open Tool and click on Set Model button and choose E2252_Utica_Setting_v00_production.mdl

3. Click on Main Partition and choose E2252DD.ptt

4. Click on CSC button and choose E2252DD.ptt from CSC folder

5. Now Click on Start Button and Press 1 + 3 button and insert usb cable

6. You are done

Samsung E2252 Flash done in Flash tool Screenshot:

Samsung GT-C3262 restarting with sim 100% solution tested

Samsung GT-C3262 restarting with sim 100% solution tested

Samsung GT-C3262 model Screenshot:

Everyone searching this solution in internet but some technician not understand how to solve that problem but here i put some information to everyone better understand it's every easy to use and also use simple language just consent your mind in this tutorial because if any content missing in this tutorial so you can't solve that problem so please read full tutorial after following this tutorial here giving link for tested flash file so first download it after following to procedure and also remember before use this tutorial check first your devices battery and also check hardware issue if that problem in your device so you can't done this job so remember first most already not enough for only this device first check devices now let's go how to flash samsung GT-C3262 in flash tool.

Samsung GT-C3262 Flash file from here

Required for sim restart solution:

1. Samsung GT-C3262 flash file with tested

2. Samsung GT-C3262 Device with battery charged

3. HWK Box

4. Micro usb cable

5. RJ45 Cable

6. Computer or Laptop

Procedure:

1. Download tested flash file from above link

2. Extract to Desktop or as you wish path

3. Open FlashLoader_7.5.16_CSC_v0.1_LITE folder

4. Open bfloader.exe

5. Click on SetModel button and choose QuatroTeestaKoalaKiwiEdge_Production_Setting_v02.mdl

6. Now Click on Main Partition button and choose C3262DD.ptt from C3262DDLI8_BIN folder

7. Click on CSC button and choose C3262WN.ptt from C3262OWNLI2_CSC folder

8. Click on Start button

9. Press and Hold Volume Down + Lock key and insert usb cable

10. Wait until full flash

Samsung GT-C3262 Flash done in Flash tool screenshot:

11. After full flash open ufs box

12. Choose model C3262 from Swift button

13. Click on Write E2P button and choose C3262_000000001E060200_E2P.bif from C3262_000000001E060200_E2P folder

14. Now use RJ45 Cable for write e2p

15. Insert RJ45 cable in to device and insert battery

16. After done Write E2P write correct imei

17. Now click on Rebuild IMEI button and write your correct imei

18. You are done

Samsung GT-C3262 Write E2P or Rebuild IMEI in UFS Screenshot:

Samsung S5610K flash done with flash tool 100% tested by me

Samsung S5610k flash done with flash tool 100% tested by me

Samsung S5610K Mobile Screenshot:

About this tutorial:

This tutorial tested by me in Samsung S5610k in that problem of restarting problem when your flash with below link flash file from below link tool i was success in flash and here also put screenshot of success flash. If you have samsung s5610k device and in that problem like hang on logo, restarting, screen lock etc problem related software so you can use this tutorial with this tested flash file or tools but remember if you use this tutorial you can't save your data if mobile live in problem of screen lock or other code and also must remember your device battery must charged and also remember before use this tutorial must your first your device of shorting problem if your device shorting and try to may be your device dead or other problem so must first check hardware after following this tutorial so next let's go how to flash Samsung S5610K in flash tools.

:: Download Area ::

Download Samsung S5610K Flash tool from HERE

Download Samsung S5610K Bin file from HERE

Download Samsung S5610K CSC file from HERE

Required for Flash:

1. Samsung S5610K Device with full battery charged

2. Samsung S5610K tested file (note: above files are tested)

3. Micro USB cable

4. Computer or Laptop

Procedure:

1. Download all are files

2. Extract to all are files in desktop or as you like path

3. Now Open folder of S5610_Flash_Loader_7.5.3_S5610_Utopia_Lite

4. Open bfloader tool

5. Click on SET Model Button and choose S5610_Utopia_Setting_v00.mdl file

6. Now go down and click on Main box and go ahead Click on Main Partition Table button and Choose Browse button and select S5610KDDLH2.ptt file

7. Next Click on CSC box and go ahead and Click on CSC Partition Tablet button and choose Browse button and select S5610KODDLH2.ptt file

8. Click on Start Button

9. Insert battery in to device

10. Press and Hold "1 + 3" button same time and insert usb cable

11. Wait until flash done

12. You are done :)

Samsung S5610K flash done with flash tool screenshot:

Samsung Wave S5380K Flash done in flash tools with download tested flash file or tools here

Samsung Wave S5380K Flash done in flash tools with download tested flash file or tools here

Samsung Wave S5380k model Image :

About this tutorial:

This tutorial tested by me in Samsung Wave S5380K in that problem are mobile start in main screen but restarting so first check hardware in shorting but it is fine not short in any space in board so try to flash, if any have device of Samsung Wave S5380K and in that problem like restarting problem, screen lock, hang on logo any problem of software related so you can use this tutorial with tested flash file or tools and here put link of Samsung Wave S5380K include flash tools also so remember everyone no fine any other tools because this link also in flash tools but remember everyone before try to flash first check hardware issue if will be device after that try in flash because some device while problem of hardware then you try to flash then your device will be dead or other problem so carefully use this tutorial and here also step by step guide for better understand technician who working in mobile software related so let's go how to flash Samsung Wave S5380K in Flash tools see below guide in step by step.

Download Samsung S5380k flash Tested 100000% HERE

Required for Flash:

1. Samsung Wave S5380K with full battery charged

2. Samsung Wave S5380K Tested Flash file or tool

3. Micro USB cable

4. Computer or Laptop

Procedure:

1. Download tested Samsung Wave S5380K flash file or tool

2. Open Downloader V5.66 (this tools include in Samsung Wave S5380K files)

3. First Tick on BRCM2153

4. After Click on Full Download Button

5. Click on Boot button and choose BOOTFILES

6. Click on Amss and choose amss.bin file

7. Click on Apps and choose apps_compressed.bin file

8. Click on Rsrc1 and choose Rsrc_S5380K_India_ODD.rc1 file

9. Click on Rsrc 2 and choose Rsrc2_S5380K(Low).rc2 file

10. Click on Factory FS and choose FactoryFs_S5380K_India_ODD.ffs file

11. Click on SHP APP  and choose ShpApp.app file

12. Click on CSC  and choose CSC_S5380K_India_ODD.csc file
13. Click on FOTO and choose bplib_S5380KOpIndiaCommon.foto file
14. Now Insert battery in device
15. Press and Hold Volume Down + Home + Power for Download Mode
16. Attach USB cable in to device
17. Click on Download button in Downloader Flash tool wait until Flash finished

Samsung Wave S5380K Flash done screenshot:

Note : If any problem while flashing then write down your query in below comment box i will reply soon with good answer

Samsung Galaxy S4 GT-I9500 Null Imai repair done with Odin tools free download HERE

Samsung Galaxy S4 GT-I9500 Null Imai repair done with Odin tools free download HERE

Samsung Galaxy S4 GT-I9500 Model Image :

Must Read:

Samsung Galaxy S4 GT-I9500 in some time imei will be null but don't worry i have imei null solution but remember after this tutorial has been finished and your problem not solve so understand in that hardware issue when you starting following to this tutorial first your Samsung Galaxy S4 GT-I9500 battery must charged and some technician flashing in Samsung Galaxy S4 GT-I9500 remember that Firmware to be tested without tested your try to flashing with another firmware so your Samsung Galaxy S4 GT-I9500 imei will be damage then you check on device to dial *#06# then you can see imei null so remember before flashing your Samsung Galaxy S4 GT-I9500 firmware will be tested so le't go how to null imei repair in Samsung Galaxy S4 GT-I9500.

Download Odin tool from HERE

GT-9500_NOV.pit (3 KB) Download here

BOOTLOADER_I9500XXUBMF8.rar (478 KB) Download here

PDA_I9500XXUBMF8.rar (1.29 GB) Download here

PHONE_I9500XXUBMF8.rar (4.8 MB) Download here

CSC English
CSC_I9500SERBMF8.rar (144.3 MB) Download here

CSC Arabic
CSC_OJV_I9500OJVBMGA_1123221_REV00_user_low_ship.r ar (128.2 MB) Download here

Required for Null Imei Repair:

1. Odin Tool

2. Samsung Galaxy S4 GT-I9500 Imei null repair firmware

3. Samsung Galaxy S4 GT-I9500 device with full battery charged

4. USB cable

5. Computer or Laptop

Procedure:

1. Download both of files 1. Odin Tool 2. Fix Imei Null Firmware

2. Extract both of files

3. Open Odin Tool folder and open Odin Tool

4. Click on PDA button and choose Firmware file

5. Put Download Mode your device  ( Press and Hold Volume Down + Home + Power Button)

6. Insert USB cable in to Device

7. Click on Start Button

8  You are done

Screen shot of Imei null :

Samsung SM-G7102 Firmware or Downgrade guide 4.4.2 (Unbrick Tested) Free here

Samsung SM-G7102 Firmware or Downgrade guide 4.4.2 (Unbrick Tested) Free here

Remember: This firmware Only fix Bootloop issues and always Booting in recovery mode after flash to 4.4.2 hang Logo Only recovery mode.

Procedure:

* press and hold volume down + Home + Power button for download mode

* Remember : do not connect with pc using usb

* Open Odin flash Tools

* choose firmware in PDA

* Important step : Uncheck Auto Boot in Odin option

* Click on Start button

* After Flash finished Disconnect your mobile and Remove battery Wait for 20 seconds and Insert Battery Power start your Mobile via using Power on button

* when downgraded from 4.4.2 after Hard Reset your mobile should boot

* when flash your mobile not started after do Hard reset it


Note:This is tested Worked Fine and also IMEI done

 
Firmware Download from Here Android ver. 4.3


Odin Tools Download from HERE

Note : if any issue when your flash this firmware and use this tutorial just write down your query in below comment box.

Samsung S7562 Flash done with odin Tool 100% Tested Firmware Free Download HERE

Samsung S7562 Flash done with odin Tool 100% Tested Firmware Free Download HERE

:: Model ::

 

:: Firmware or Tool ::

Download Firmware

Download Tool

:: Procedure ::

* Put your mobile Download mode via ( Press & Hold Volu. Down + Home + Power key)

* Attach with your computer and open Odin Tool

* Click on PDA button and select Firmware

* Click on Start

* You are done

 :: Proof Success Flash Tutorial ::